Home » Traeger » How To Install Traeger Drip Tray Liner?

How To Install Traeger Drip Tray Liner?

Ready to take your Traeger grill game to the next level? Then it’s time to invest in a drip tray liner. This simple accessory not only makes cleaning up after a BBQ session a breeze, but also helps maintain the longevity of your grill. Don’t worry, installing a Traeger drip tray liner is easier than flipping burgers on the grill. In just a few simple steps, you’ll be able to enjoy all the benefits of this must-have accessory.

So, how do you install a Traeger drip tray liner? Let’s break it down into easy-to-follow instructions:

  • Step 1: Remove the existing drip tray from your grill.
  • Step 2: Place the new drip tray liner inside the empty space.
  • Step 3: Ensure that the liner fits snugly against the sides and bottom of the tray.
  • Step 4: Carefully place the original drip tray on top of the liner.
  • Step 5: Secure it in place by reattaching any clips or screws.

Your Traeger drip tray liner is now installed and ready for action. No need for complicated tools or hours of labor – just a few minutes and you’re good to go.

Say goodbye to messy cleanups and hello to effortless grilling with your new Traeger drip tray liner. So why wait? Elevate your grilling experience today and enjoy perfectly cooked meals every time. Happy grilling.

Primary Benefits of Using Traeger Drip Tray Liner

Using a Traeger drip tray liner not only keeps your grill clean, but it also has a wide range of benefits that make it an essential addition to your grilling experience. Not only does it prevent grease buildup, but it also prevents dreaded flare-ups that can ruin your food.

Additionally, the liner adds a burst of flavor to your dishes while being cost-effective and versatile in its usage.

  • One of the primary advantages of utilizing a Traeger drip tray liner is its ability to keep your grill clean and free of grease buildup. Grease buildup not only affects the taste of your food, but it can also be a breeding ground for bacteria and lead to potential health hazards. By using a liner, you can easily dispose of any excess grease and keep your grill in pristine condition.
  • Another benefit is its ability to prevent flare-ups, which can be a frustrating problem for any grill master. Flare-ups can not only ruin the taste of your food but also pose a safety hazard. With a Traeger drip tray liner, you can say goodbye to flare-ups and focus on perfecting your grilling skills.
  • Not only does the liner improve the overall cleanliness and safety of your grill, but it also enhances the flavor of your food. The liner collects drippings from your food and infuses them back into your dishes, adding an extra layer of deliciousness to every bite.
  • Moreover, using a Traeger drip tray liner is a cost-effective solution for maintaining your grill. It helps prolong the lifespan of your grill by preventing buildup and potential damages, saving you money in the long run.
  • Lastly, the versatility of the liner makes it compatible with different types of grills, making it a convenient choice for all grill enthusiasts. Whether you have a gas, charcoal, or electric grill, the Traeger drip tray liner is an excellent addition to enhance your grilling experience.

Where Does the Traeger Drip Tray Liner Go?

The Traeger drip tray liner is a crucial component of your grill setup, as it plays a vital role in ensuring both safety and flavor. To properly use the liner, place it directly under the grill grates, ensuring that it covers the entire tray.

This allows for easy disposal of excess grease and food debris, as the tray is designed to channel them into a designated grease bucket or trough.

Specifically designed for Traeger grills, the disposable aluminum liner provides an optimal cooking experience. It is easy to replace, making it effortless to keep your grill clean.

Also Read:  How To Clean Traeger Rtd Temperature Probe?

Proper placement of the drip tray liner is essential for maintaining safety and adding flavor to your dishes. By collecting grease and food debris, the liner prevents flare-ups and reduces the risk of fire. As the grease drips down into the tray, it adds a smoky flavor to your BBQ, enhancing the overall taste.

Here are some tips for correctly using and placing the Traeger drip tray liner:

  • Ensure that the liner is securely placed on the tray, without any edges hanging over. This prevents potential spills or hazards.
  • Regularly replace the liner to maintain a clean and safe cooking surface.
  • Dispose of collected grease in the designated bucket or trough, avoiding pouring it down your sink or drain to prevent clogs.
  • For added flavor, try adding wood chips or herbs to the drip tray before placing the liner on top. This infuses your dishes with a unique smoky taste.

Do You Really Need a Drip Tray on a Traeger Grill?

A drip tray on a Traeger Grill serves a crucial purpose in the grilling process. Its main function is to catch and contain any grease or fat that drips from the food being cooked, thereby ensuring a safe and clean grilling experience.

How To Install Traeger Drip Tray Liner-2

It is highly recommended to use a drip tray when grilling on a Traeger Grill for optimal results and to prolong the life of your grill.

Why is it important to have a drip tray?

  • Prevents Flare-Ups: When grease and fat drip onto hot coals or flames, it can lead to flare-ups that can result in unevenly cooked or burnt food. The drip tray effectively collects the grease, preventing it from falling onto the heat source.
  • Easy Cleanup: The presence of a drip tray makes post-grilling cleanup a breeze. Instead of having to scrub off stubborn grease and debris from your grill, you can simply remove the drip tray and dispose of the collected grease.
  • Enhances Flavor: The collected grease in the drip tray can be utilized to baste the food, adding an extra layer of flavor and moisture. This is particularly beneficial when smoking or slow-cooking meats.
  • Protects Your Grill: Over time, grease and debris buildup can cause damage to the internal components of your grill. The drip tray effectively prevents this buildup, ensuring that your grill remains in top-notch condition.
  • Drip Tray Liners Available: For even easier cleanup, Traeger offers disposable drip tray liners that fit perfectly into the drip tray. These liners can be easily replaced after each use.

How to Install Traeger Drip Tray Liner?

Step 1: Preparation

  • First, make sure to turn off your grill and allow it to cool down completely.
  • Gather all the necessary tools and materials before proceeding.

Step 2: Remove the previous liner (if applicable)

  • Carefully pull out the old liner from the bottom of the grill and dispose of it accordingly.

Step 3: Clean the drip tray

  • Use a cleaning solution and paper towels to thoroughly clean the drip tray.

Step 4: Install the new liner

  • Unroll the new drip tray liner and place it on top of the now-cleaned drip tray.
  • Ensure that it fits snugly without any wrinkles or gaps.
  • If needed, trim any excess material.

Step 5: Test fit

  • Turn on your grill and let it run for a few minutes.
  • Make sure that the liner stays in place and does not shift around.

Step 6: Dispose of the old liner

  • Properly dispose of disposable liners after use.

How Often You Should Change Traeger Drip Tray Liner?

As suggested on Traeger’s official website, it is advisable to replace the drip tray liner after every 3-4 uses or when it reaches full capacity.

However, the frequency of this replacement may differ depending on variables such as the type of food being prepared and weather conditions.

How Do You Wrap a Traeger Drip Pan?

When it comes to wrapping a Traeger drip pan, the key is to utilize a Traeger drip tray liner.

How To Install Traeger Drip Tray Liner-3

This liner must be carefully molded to fit the shape of your drip pan.

How Do You Remove a Traeger Drip Tray?

We have provided a table below outlining the precise method for doing so.

Step Description
1 Ensure that your grill is turned off and has completely cooled down.
2 Locate the drip tray positioned under the grill grate.
3 Carefully slide out the drip tray using heat-resistant gloves.
4 Place the drip tray on a flat surface or in a sink to cool down.
5 Dispose of any leftover grease into a container that can be easily discarded.
6 Clean the drip tray with warm soapy water and a non-abrasive sponge.
7 Rinse off any soap residue and dry the tray with a clean cloth.
8 Ensure that the drip tray is completely dry before placing it back into your grill.
9 Slide the drip tray back into its original position under the grill grate.
10 Preheat your grill before using it again for optimal performance.
Also Read:  Is A Traeger Supposed To Smoke A Lot?

By following these simple yet crucial steps, you can easily remove and clean your Traeger drip tray, ensuring that your grill continues to function at its best.

How to Clean Traeger Drip Tray?

When it comes to cleaning your Traeger drip tray, there are two effective methods you can use. The first involves using an oven cleaner and plastic wrapping, which effectively removes any grease or residue buildup and helps keep the drip tray in good condition for future use.

This method is quick and efficient, leaving your drip tray looking like new. The second method is to remove the drip tray and clean it with soapy water. This method may take a bit more time, but it is just as effective in maintaining the cleanliness and functionality of your grill.

Regularly cleaning your Traeger drip tray is crucial for several reasons. Not only does it prevent any potential hazards, such as grease fires, but it also ensures the longevity of your grill. A dirty drip tray can affect the flavor of your food and potentially damage the internal components of your grill.

By regularly cleaning your drip tray, you can avoid these issues and continue to enjoy delicious and safe meals from your Traeger grill.

To clean your Traeger drip tray with oven cleaner and plastic wrapping, follow these simple steps:

  • Remove the drip tray from your grill and place it on a flat surface.
  • Spray an oven cleaner onto the tray, making sure to cover all areas.
  • Cover the tray with plastic wrapping and let it sit for 10-15 minutes.
  • Remove the plastic wrapping and use a damp cloth or sponge to wipe away the cleaner and any remaining residue.
  • Rinse the drip tray with water and dry it with a clean towel before placing it back in your grill.

For those who prefer a more natural cleaning method, you can simply remove the drip tray from your grill and wash it with warm soapy water. Make sure to thoroughly rinse and dry it before putting it back into your grill.

By regularly cleaning your Traeger drip tray using one of these methods, you can ensure that your grill stays in top condition and continues to provide delicious and safe meals for years to come.

How to Use Traeger Grill without Drip Pan?

For those interested in using a Traeger grill without a drip pan, follow these steps for success:

  • Begin by thoroughly cleaning the grill and ensuring that the grates are free from any debris.
  • Create a slight incline towards the front of the grill by lining the bottom with two layers of heavy-duty aluminum foil.
  • Place a metal or ceramic dish in front of the grill to catch any grease that may drip off the foil.
  • Keep a close eye on the cooking process and adjust the temperature as needed to prevent flare-ups and excessive grease buildup.
  • Once finished cooking, clean any leftover grease and food particles from the foil and grates.


In conclusion, the addition of a Traeger drip tray liner to your grilling setup is truly a game-changer. Not only does it effortlessly simplify the post-BBQ cleanup process, but it also helps prolong the lifespan of your grill.

Installation is a breeze – just a few simple steps and you’ll be reaping all the benefits of this must-have accessory.

By following the user-friendly instructions outlined in this article, you can easily install your Traeger drip tray liner and elevate your grilling experience. Say goodbye to messy cleanups and hello to perfectly cooked meals every time.

Using a Traeger drip tray liner offers numerous other advantages such as preventing flare-ups, enhancing flavor, being cost-effective, and having versatile usage.

It’s an essential addition for any grill enthusiast looking to take their grilling game to the next level.